Martin Brother - Long Throw W8LMD

W8LMD
Non disponibile

Descrizione

The W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM. Its 20° vertical dispersion requires fewer cabinets to cover the same area as a conventional line array element, yet it still benefits from the smooth, predictable coverage of a vertically coupled system.

FEATURES

  • Stand alone vertically arrayable enclosure
  • Line array downfill element
  • Consistent 120º (-6dB) horizontal mid and HF pattern control
  • 20º (-6dB) vertical dispersion
  • Tripod mountable singularly or in pairs
  • Amplitude shading switch
  • Passive or Bi-Amp format
  • Compatible with WMX, WLX, WSXa, WS2A & WS218 subwoofers

APPLICATIONS

 

  • Short to medium throw arrays of 1 to 4 cabinets
  • Vertically arrayed downfill for W8LM systems
  • Theatre sound reinforcement
  • Corporate events
  • Fixed installations

 

TYPE Three-way, active/passive, mini downfill line array element
FREQUENCY RESPONSE (5) 60Hz-18kHz ± 3dB
DRIVERS: LF + MF Section 8" (200mm)/2" (50mm) voice coil, reflex-loaded direct radiator
8" (200mm)/2" (50mm) voice coil, neodymium driver, front horn loaded, rear reflex loaded
DRIVERS: HF Section 2 x 1" (25mm) exit HF compression drivers,
horn loaded
RATED POWER (2) LF + MF: 400W AES, 1600W peak
HF: 75W AES, 300W peak
FR: 400W AES, 1600W peak
RECOMMENDED AMPLIFIER MA5.2K
SENSITIVITY (6) LF + MF: 99dB
HF: 104dB
FR: 98dB rising to 103dB at HF
MAXIMUM SPL
(calculated @ 1m)
LF + MF: 125dB continuous, 131dB peak
HF: 123dB continuous, 129dB peak
FR: 124dB continuous, 130dB peak
NOMINAL IMPEDANCE LF + MF: 12 ohms
HF: 12 ohms
FR: 12 ohms
DISPERSION (-6dB) 120º horizontal (down to 750Hz),
20º vertical
140º horizontal (down to 650Hz) @ -10dB
CROSSOVER 300Hz passive, 2.2kHz active or passive Shading control switch – rear mounted
ENCLOSURE Vertical trapezoid with 10º wall angle, multi- laminate birch ply construction
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS Proprietary rigging system
2 x pocket handles each side
4 x M8 inserts for externally mounted top hat fitting
DIMENSIONS (W) 620mm x (H) 284mm x (D) 400mm
(W) 24.4ins x (H) 11.2ins x (D) 15.8ins
WEIGHT
(inc. rigging hardware)
30kg (66lbs)

Caratteristiche

Brand:
Martin Brother