Stereo amplifier HI-FI USB-Bluetooth-MP3-FM Max.1200W
- Make An Offer
Stereo amplifier HI-FI USB-Bluetooth-MP3-FM Max.1200W
Currrent Price: €208,40
Stereo HI-FI amplifier USB-Bluetooth-MP3-FM Max.1200W
HI-FI Stereo Amplifier FROM BEN 1200W Peak, 600W RMS. The most powerful Stereo HI-FI amplifier with 8 Final Transistors in push-pull configuration capable of delivering 300Watt + 300Watt RMS per channel .
The power of 300W + 300W RMS is indicated as the actual power supplied by the APA-160BT therefore it is recommended to use speakers suitable for the amplifier.
Technical characteristics
- Model: APA-160BT
- Power supply: AC 220V, 60Hz
- Power consumption: 230W
- Size: 430 (W) x100 (H) x300 (D) mm
Features
- Volume Control
- Bass Control
- Midrange Control
- Alti control
- Balance control
- Mic control
- Echo control on the Mic.
- Standard Jack 6.3 front input for 2 Microphones
- Loudness function (emphasizes low and high sounds)
- Front USB reader input SD Card
- Keys for MP3 control
- Function B luetooth
- AUX / DVD selector - BT / FM / USB
- Integrated FM Radio
- Various Rear RCA inputs and outputs
- Rear connector for FM radio reception antenna
- Connector rear + Antenna supplied for Bluetooth
- Possibility to connect 2/4 Speakers respecting the impedances as indicated on the rear panel.
Specifications
- MAX POWER 600W + 600W at 4-Ohm
- RMS POWER 300W + 300W at 4-Ohm
- RMS POWER 200W + 200W at 8-Ohm
SPEAKER PROTECTION and LIMITER POWER
The APA-160BT being a very powerful amplifier is equipped with internal protection that acts according to the type of speakers you are going to connect, for example if the speakers do not support the power delivered by the amplifier when it reaches an out of volume threshold, it enters protection and interrupts the sound for a few seconds.
This protection also acts when you go outside the peak power threshold to avoid damaging the speakers, the sensitivity of the protection is higher when connecting low impedance 4 Ohm speakers, the protection threshold will be less sensitive with 8 Ohm speakers.
Recommended the use of speakers suitable for the power of the amplifier.