Turntable preamp with controls
- Make An Offer
Turntable preamp with controls
Currrent Price: €33,60
microPHONO PP500 ultra-compact preamplifier with level and volume controls
Ultra-compact phono preamplifier with metal shell, portable and durable.
Converts the phono signal to a line level signal.
2 RCA inputs (L & R), 2 * RCA outputs (L & R), 1 * 1/4 "TRS output, multiple connection choices.
With level and volume control knobs.
Ultra-low-noise audio op-amps deliver exceptional audio performance.
Instructions
(1) 12 V connector- To connect the power supply to the PP500, use the 12 V connector
- the power supply unit automatically activates the PP500. To log out
- the unit from the mains, pull out the plug of the main cable.
- As soon as the unit is connected to the network, the ON LED lights up.
- To send a turntable signal to the PP500, you need an RCA (stereo) audio cable. Use this
- connection cable:
- the left output on the turntable to L (left) INPUT on the PP500
- the right exit on the turntable to INPUT R (right) on the PP500
- The PP500 can output a line level signal via one of the following connectors:
- RCA ((4) L and R OUT)
- ¼ "TRS ((5) OUTPUT)
- Do not use both PP500 OUTPUTS at the same time.
- To use these RCA connectors, you need an RCA (stereo) audio cable. Use this audio
- connection cable:
- L (left) OUTPUT on the PP500 to the left on the amplifier,
- recording unit or mixer. (On a mixer, use a CD or TAPE input.)
- R (right) OUTPUT on the PP500 on the right input on the amplifier,
- recording unit or mixer
- To use this ¼ ", TRS (stereo) connector, you need an audio cable. Use the audio cable
- to connect the PP500 OUTPUT to an input on the mixer, amplifier or recording unit.
- One end of this audio cable must include a ¼ ”TRS connector. If the input on the mixer,
- the amplifier or recording unit is:
- stereo, the other end of the audio cable must include a ¼ "TRS connector
- mono, the other end of the audio cable must include 2 TS connectors
- (one for each mono input)