Styrene-free Hybrid Polyester Resin Chemical Anchor FIS P PLUS 300 T 300ml

The FIS P PLUS 300 T is a high-performance chemical injection anchor, formulated in styrene-free hybrid polyester resin, certified for structural anchors in masonry and non-cracked concrete.
It is designed for professional and industrial applications that require reliability, safety and versatility on a wide range of building materials.

Thanks to its controlled thixotropy, the resin does not drip or drip, allowing precise applications both horizontally and vertically, with excellent anchor bar adhesion.

Key Benefits

• Styrene-free resin with low VOC (VOC) content, suitable for indoor environments
• High thixotropy: does not drip and does not drip
• Can also be used in wet holes (with doubling of setting times)
• High mechanical stability with operating temperature range of -40°C to +80°C
• Minimal initial bleeding to reduce waste
• Controlled visual mixing: homogeneous gray color when properly mixed
• Ready-to-use cartridge without inner bags
• Compatible with FIS MR PLUS mixer
• Certified for masonry and uncracked concrete

Certified applications

Can be used with:

• FIS A threaded rod

  • for concrete, solid bricks and aerated concrete

• FIS A threaded rod + FIS H K mesh anchor

  • for solid and hollow bricks

• Internally threaded sleeve FIS E

  • for solid bricks and aerated concrete

• FIS E threaded socket + FIS H K mesh anchor

  • for solid and hollow bricks

Also suitable for:

• FIS A threaded rod + FIS H N sock anchor (hollow bricks)

• FIS A threaded rod + FIS H L mesh bushes (hollow bricks)

Areas of use

Suitable for the safe anchoring of:

• Metal fences and gratings
• Light carpentry
• Carpentry work
• Security doors
• Windows and doors
• Curtains
• Antennas

Certified support materials

• Uncracked concrete class C20/25 – C50/60
• Solid brick
• Solid calcium silicate brick
• Solid block in lightweight concrete
• Semi-solid brick
• Semi-solid calcium silicate brick
• Cable lock
• Aerated concrete

Certifications

• ETA-18/0383
• ETA-11/0419
• DoP No. 0319
• DoP No. 0320

Assembly instructions

• The resin consists of two separate components (resin + hardener) that automatically mix in the mixer
• Clean the hole thoroughly before injection
• Extrude the resin starting from the bottom of the hole slowly
• Insert the bar by turning it slowly until the end of the stroke
• The resin adheres completely to the bar and the walls of the hole sealing the anchor
• The cartridge can be reused by replacing the mixer
• For the 300 T format: at the end of the work, leave the mixer mounted and replace it when it is recovered.

Technical data

• Storage: 12 months
• Content: 300 ml
• Packaging: 1 x 300 ml cartridge + 1 x FIS MR PLUS mixer
• Size: cartridge
• Quantity: 1 pcs
• EAN: 4048962337006
• Supplier code: 58862
• Brand: Fischer